An organized, clean laundry room may be an effective space to get household chores accomplished. But, a washer which vibrates excessively or shakes your whole house while the spin cycle is running disrupts the oasis you have in mind. As the washer shakes, it may damage interior mechanisms and all things close to the appliance, which includes the floor and walls.
The issue is simple: the washer isn’t sitting level.
Thankfully, the fix is just as easy, because of adjustable legs which screw up and down. It’ll make it simple to figure out how to level a washer without professional help. Just follow these directions.
How to Level a Shaking Washer
Figure out if the washing machine is level: Utilize a carpenter’s bubble level or locate a phone app which mimics the tool. Set the device on top of your washer, first from side to side then front to back, to check if it is level. If the bubble does not center itself, you’ll have a bit of adjusting to do.
Loosen lock nut: The washer’s front legs screw down and up. Before it’s possible to adjust them, you have to loosen the lock nut on both.
Adjust front legs: The washer probably won’t vibrate if it’s low to the floor. To keep your machine as low as it can go, screw one leg all of the way in then adjust the other ones as necessary until the machine sits flat according to the smartphone app or carpenter’s level.
Check rear legs: The majority of washers feature self-leveling rear legs. As you get the washer level from side to side, have another person assist you in tipping it forward so its rear legs lift off of the floor by 3” – 4”. As you set the machine back down, its legs ought to automatically adjust so the washer sits level from its front to back. But, some washers have the same kind of adjustable legs within the rear like they do in the front. Within this case, you have to manually adjust the rear legs until the washer is level.
Re-tighten lock nuts: With all of the adjustments made, double-check the washer level from side to side then front to back. Next, tighten all lock nuts against the washer to keep its legs from rotating over a period of time. Lean against the machine to ensure that it does not rock back and forth.
Test the machine: Run your spin cycle and be on the lookout for excessive vibration. If the washer still shakes, check again to see that all screws are tight on storage bases and stacking units. Next, evaluate the floor of the laundry room. Leaks might cause the floor to become uneven and rotten, calling for a replacement.
Check the machine every couple of months: It is possible for your house to settle over time and perhaps shift from one season to another. If you see excess vibrations, reevaluate the washing machine’s level.
For more information on how to level a washing machine contact the best washer repair services of Mike’s Quality Services today!